Description

Mig / CO2 Welding Wire is a general-purpose welding wire for the fabrication of mild steel. It contains deoxidizers (Mn & Si) that provide better wetting, yielding a flatter bead shape and the capability of faster travel speeds. This wire is suitable for welding of steels with moderate amounts of scale or rust. It is usually used with Argon / CO2 (75 / 25) shielding gas or with higher contents of Argon, such as 90 / 10. It can also be used with 100% CO2

WIRE CHEMICAL COMPOSITION REQUIREMENTS
C 0.06 - 0.15 Ni 0.15 max
Mn 1.40 - 1.85 Cr 0.15 max
Si 0.80 - 1.15 Mo 0.15 max
P 0.025 max V 0.03 max
S 0.035 max Cu 0.50 max

Available Sizes

0.80, 0.90, 1.00 and 1.20mm

Packing

  • 1. Precise Layer Winding on Plastic Spools in 12.5kg and 15.0kg
  • 2. Drum Packing in 100 kgs and 250 kgs

DEPOSITED CHEMICAL COMPOSITION % (TYPICAL)
C 0.09 P 0.09 SI 0.95
Mn 1.65 S 0.018 Cu 0.35

DEPOSITED ALL WELD METAL MECHANICAL PROPERTIES % (AS WELDED)
Tensile Strength 480 MPa (70 ksi) minimum
Yield Strength 400 MPa (58 ksi) minimum
Elongation 22% minimum
Charpy V-Notch @ -30deg C (-20 deg F) 27 J (20 ft-lbs) minimum